YMC-Pack Diol
YMC-Pack Diol-NP Guard Columns
YMC recommends that you always use a guard column with the same packing material and of the recommended inner diameter for your column. A YMC guard column is normally composed of a cartridge holder and a guard cartridge. The holder can be used repeatedly. Guard cartridges should be changed frequently in order to maximise their protection of the main column.
In normal phase mode the YMC-Pack Diol stationary phase is a versatile alternative to silica. The bonded phase’s hydroxyl groups provide good selectivity without excessive retention, since hydrogen bonding with the diol layer is not as strong as with the silanols on a non bonded silica surface. YMC Pack-Diol also provides improved reproducibility when compared with bare silica.
Diol packings are also suitable for separations using reversed phase techniques or molecular weight determination of proteins by gel filtration.
- Buy
- Features
-
- Suitable for normal phase, HILIC and SEC applications
- Good selectivity without excessive retention
- High product recovery rate
- Reproducible
- Improved peak shape versus bare silica
- Large selection of guard dimensions available
- Specifications
-
YMC-Pack Diol-NP Modification 1,2-Dihydroxypropyl Particle size 5, 10 µm Pore size 6 nm / 60 Å 12 nm / 120 Å 20 nm / 200 Å 30 nm / 300 Å Surface area 450 m2/g 330 m2/g 175 m2/g 100 m2/g pH range 2 - 7.5 - Literature
-
-
YMC General Catalogue
Contains information on the full range of YMC columns
-
YMC Analytical Column Overview
Specifications of the full range of YMC columns
-
Hand-Tight Type Guard Cartridge Data Sheet
Instructions for using the hand-tight type guard cartridge system
-
Semi-Prep Guard Cartridge Data Sheet
Instructions for using the semi-prep guard cartridge system
-