HP-5

HP-5 GC Columns from Agilent Technologies

Precision-engineered and non-polar, Agilent J&W HP-5 delivers superb performance in a wide range of applications. This column is bonded, cross-linked and solvent-rinsable, and is equivalent to USP phase G27. HP-5 is in widespread use as a high-performing general-purpose column available in a variety of configurations.

HP-5 - excellent non-polar, general purpose GC columns with high temperature limits for a wide range of applications
HP-5ms - non-polar, low-bleed, and deliver excellent inertness for active compounds, including acidic and basic compounds
HP-5ms Semivolatile - very-low-bleed characteristics that are specifically tested for inertness to active compounds
HP-5ms Ultra Inert - high performance, non-polar, low-bleed GC column that is excellent for trace level analysis of acidic and basic compounds

HP-5 All pictures shown are for illustration purpose only. Actual product may vary.

Buy

Features

HP-5 GC Columns

(5%-Phenyl)-methylpolysiloxane
Non-polar and an excellent general purpose column
Wide range of applications
High temperature limit
Bonded and cross-linked; solvent rinsable
Equivalent to USP Phase G27

Similar Phases: SPB-5, Rtx-5, BP-5, OV-5, 007-2(MPS-5), SE-52, SE-54, XTI-5, PTE-5, ZB-5, AT-5, MDN-5, ZB-5

HP-5ms GC Columns

Agilent J&W HP-5ms has very low bleed characteristics that are ideal for GC/MS. The column has excellent inertness for active compounds, including acidic and basic compounds, and improved signal-to-noise ratio for better sensitivity and mass spectral integrity. HP-5ms is also solvent-rinsable because it is bonded and cross-linked. HP-5ms is equivalent to USP phase G27 and delivers excellent performance across a range of applications.

(5%-Phenyl)-methylpolysiloxane
Identical selectivity to HP-5
Non-polar with very low bleed characteristics, ideal for GC/MS usage
Excellent inertness for active compounds, including acidic and basic compounds
Improved signal-to-noise ratio for better sensitivity and mass spectral integrity
Bonded and cross-linked; solvent rinsable
Equivalent to USP Phase G27

Similar Phases: Rtx-5ms, Rxi-5ms, Rxi-5Sil MS, PTE-5, BPX-5, AT-5ms, ZB-5ms, SLB-5ms, Equity-5

HP-5ms Semivolatile GC Columns

Agilent J&W HP-5ms Semivolatile columns are specifically tested for inertness for active compounds, including acidic and basic compounds. With an effective operating temperature range of -60 to 325/350 oC, these nonpolar columns offer industry-leading levels of sensitivity and analysis integrity. All columns are tested to Agilent's demanding QC industry standards and are bonded, cross-linked and solvent rinsable.

(5%-Phenyl)-methylpolysiloxane, identical selectivity to HP-5
Very low bleed characteristics, ideal for GC/MS
Specifically tested for inertness for active compounds including acidic and basic compounds
Improved signal-to-noise ratio for better sensitivity and mass spectral integrity
Bonded and cross-linked
Solvent rinsable
Equivalent to USP Phase G27

Similar Phases: Rtx-5ms, Rxi-5ms, Rxi-5Sil MS, PTE-5, BPX-5, AT-5ms, ZB-5ms, SLB-5ms, Equity-6

HP-5ms Ultra Inert GC Columns

Agilent J&W HP-5ms Ultra Inert is specifically tested for inertness for active compounds, including acidic and basic compounds, to meet the worldwide drive for lower detection levels. With very low bleed characteristics, bonded and cross-linked HP-5ms Ultra Inert is solvent rinsable and ideal for GC/MS. The column is equivalent to USP phase G27 and features improved signal-to-noise ratio for better sensitivity and mass spectral integrity.

Excellent for trace level analysis of acids and bases, such as semivolatiles analysis
(5%-Phenyl)-methylpolysiloxane, identical selectivity to HP-5ms
Specifically tested for inertness for active compounds including acidic and basic compounds
Improved signal-to-noise ratio for better sensitivity and mass spectral integrity
Non-polar with very low bleed characteristics, ideal for GC/MS
Bonded, cross-linked and solvent rinsable
Equivalent to USP Phase G27

Similar Phases: Rtx-5ms, Rxi-5ms, Rxi-5Sil MS, PTE-5, BPX-5, AT-5ms, ZB-5ms, SLB-5ms, Equity-7

Specifications

HP-5 Temperature Specifications

ID (mm)	0.18 – 0.32 mm	0.53 mm
Length (m)	5 – 60 m	10 – 30 m
Film (µm)	0.10 – 1.05 µm	0.88 – 5.00 µm
Temperature Limits (°C)	-60 – 325/350 °C	-60 – 260/280 °C (2.65, 5.00 µm) -60 – 300/320 °C

HP-5ms Temperature Specifications

ID (mm)	0.18 – 0.32 mm
Length (m)	12 – 60 m
Film (µm)	0.10 – 1.00 µm
Temperature Limits (°C)	-60 – 325/350 °C

HP-5ms Semivolatile Temperature Specifications

ID (mm)	0.25 mm
Length (m)	30 m
Film (µm)	0.50 µm
Temperature Limits (°C)	-60 -325/350 °C

HP-5ms Ultra Inert Temperature Specifications

ID (mm)	0.18 – 0.32 mm
Length (m)	15 – 60 m
Film (µm)	0.18 – 1.00 µm
Temperature Limits (°C)	-60 – 325/350 °C

Literature

AGILENT GC COLUMN BROCHURE

Full range of GC Columns and Applications

Videos

Agilent GC Column Installation Video GC Troubleshooting Series
Agilent Leak Check for GC GC Troubleshooting Series