HP-1

HP-1 GC Columns from Agilent Technologies

Agilent J&W HP-1 is bonded, cross-linked and solvent-rinsable and an excellent general-purpose column, often used as the industry standard. Typical applications include analysis of hydrocarbons, pesticides, polychlorinated biphenyls (PCBs), and sulfur compounds. A wide range of dimensions and column types are available.

HP-1 - non-polar, general-purpose and industry-standard column for hydrocarbons, pesticides, PCBs, and sulfur compounds
HP-1ms - excellent general purpose column with low bleed and better S/N for increased sensitivity with hydrocarbons, pesticides, PCBs, and sulfur compounds
HP-1ms Ultra Inert- excellent signal-to-noise ratios to deliver excellent peak shapes for challenging, active analytes

HP-1 All pictures shown are for illustration purpose only. Actual product may vary.

Buy

Features

HP-1 GC Columns

Agilent J&W HP-1 is bonded, cross-linked and solvent-rinsable and an excellent general-purpose column, often used as the industry standard. A wide range of dimensions is available and applications include analysis of hydrocarbons, pesticides, polychlorinated biphenyls (PCBs), and sulfur compounds.

100% Dimethylpolysiloxane
Non-polar
Excellent general purpose columns - "Industry Standard"
Superior performance of low molecular weight alcohols (< C5)
Bonded and cross-linked; solvent rinsable
Equivalent to USP Phase G2

Similar Phases: SPB-1, Rtx-1, BP-1, OV-1, OV-101, 007-1(MS), SP-2100, SE-30, ZB-1, AT-1, MDN-1, ZB-1

HP-1ms GC Columns

Agilent J&W HP-1ms is a high quality, 100% dimethylpolysiloxane, nonpolar phase with identical selectivity to HP-1. HP-1ms are excellent general purpose columns, with low-bleed characteristics and improved signal-to-noise ratios. The column produces excellent performance and sensitivity, resulting in greater mass spectral integrity. HP-1ms is bonded, cross-linked, and solvent rinsable, and operates from -60 to 325/350 °C.

100% Dimethylpolysiloxane
Non-polar
Identical selectivity to HP-1
Low bleed characteristics
Improved signal-to-noise ratio for better sensitivity and mass spectral integrity
Bonded and cross-linked; solvent rinsable

Similar Phases: Rtx-1ms, Rxi-1ms, MDN-1, AT-1, ZB-1ms, Equity-1

HP-1ms Ultra Inert GC Columns

Agilent J&W HP-1ms Ultra Inert features exceptionally low column bleed and is designed to deliver consistent column inertness performance. All HP-1ms Ultra Inert columns are individually tested with an Ultra Inert 1ms test probe mixture and the strictest industry QC standards. Providing high quality peak shapes for challenging active analytes and signal-to-noise ratios, the HP-1ms Ultra Inert delivers excellent levels of accuracy and results integrity in a range of applications, and also delivers minimal compound adsorption or degradation.

Individually tested with Ultra Inert 1ms test probe mixture
Consistent column inertness performance
Exceptionally low column bleed
Great peak shapes for challenging active analytes
Excellent signal-to-noise ratios
Minimum compound adsorption or degradation
Supports 0.18 mm id column configuration for higher sample throughput

Similar Phases: SPB-1, Rtx-1, BP-1, OV-1, OV-101, 007-1(MS), SP-2100, SE-30, ZB-1, AT-1, MDN-1, ZB-1, ZB-1ms

Specifications

HP-1 Temperature Specifications

ID (mm)	0.18 – 0.32 mm	0.53 mm
Length (m)	12 – 100 m	5 – 60 m
Film (µm)	0.11 – 5.00 µm	0.15 – 5.00 µm
Temperature Limits (°C)	-60 – 325/350 °C -60 – 260/280 °C (3.00, 4.00, 5.00 µm)	-60 – 260/280 °C (2.65, 3.00, 5.00 µm) -60 – 300/320 °C (0.88, 1.50 µm) -60 – 320/350 °C (0.88, 2.65 µm) -60 – 320/400 °C (0.15, 0.88 µm)

HP-1ms Temperature Specifications

ID (mm)	0.18 - 0.32 mm
Length (m)	15 - 60 m
Film (µm)	0.10 - 1.00 µm
Temperature Limits (°C)	-60 -325/350 °C

Literature

AGILENT GC COLUMN BROCHURE

Full range of GC Columns and Applications

Videos

Agilent GC Column Installation Video GC Troubleshooting Series
Agilent Leak Check for GC GC Troubleshooting Series