CP-SimDist

CP-SimDist GC Columns from Agilent Technologies

Agilent J&W CP-SimDist columns are guaranteed for simulated distillation up to C100. These columns are low bleed, typically only 4 to 5 pA at 400 °C. The high temperature stationary phase and polyimide coating extend column lifetimes.

Agilent J&W CP-SimDist columns are also available in UltiMetal deactivated stainless steel tubing. Perform extended analysis to C120, and it is guaranteed to a Tmax of 450 °C, due to the virtually unbreakable inert UltiMetal tubing. The internal diameter of UltiMetal tubing is the same as for fused silica 0.53 mm id (Megabore) columns, providing trouble-free automation of on-column injection. The special deactivation applied to the UltiMetal surface gives better retention time repeatability than any other high temperature column. This column is designed for ASTM D2887 and the extended D2887 method compliance.

CP-SimDist All pictures shown are for illustration purpose only. Actual product may vary.

Buy

Features

CP-SimDist GC Columns

For simulated distillation analysis up to C100
High temperature non-polar stationary phase
Low bleed improves quantitation
High temperature polyimide coating extends lifetime

Similar Phases: Petrocol EX2887, MXT-2887, Rtx-2887, AC Controls High Temp Sim Dist, AT-2887, ZB-1XT SimDist

CP-SimDist UltiMetal GC Columns

Designed for ASTM D2887 and the extended D2887 method compliance
Low bleed
Extended analysis to C120 with maximum temperature of 450 °C
UltiMetal tubing for excellent durability (same id as 0.53 mm id fused silica)
Excellent retention time repeatability and column lifetime due to special deactivation of UltiMetal surface

Similar Phases: Petrocol EX2887, MXT-2887, Rtx-2887, AC Controls High Temp Sim Dist, AT-2887, ZB-1XT SimDist

Specifications

CP-SimDist Temperature Specifications

ID (mm)	0.32 mm	0.53 mm
Length (m)	10 m	5-10 m
Film (µm)	0.10 µm	0.10 - 0.17 µm
Temperature Limits (°C)	375/400 °C	375/400 °C

CP-SimDist UltiMetal Temperature Specifications

ID (mm)	0.53 mm
Length (m)	5 - 25 m
Film (µm)	0.06 - 5.00 µm
Temperature Limits (°C)	400/400 °C (2.65, 5.00 µm) 450/450 °C (0.06 - 1.20 µm)

Literature

AGILENT GC COLUMN BROCHURE

Full range of GC Columns and Applications

Videos

Agilent GC Column Installation Video GC Troubleshooting Series
Agilent Leak Check for GC GC Troubleshooting Series